Vecow EAC-5000 User Manual page 32

2.3.1.4 GMSL Camera Port
There are eight FAKRA connectors in the rear side of EAC-5000. Each camera
connects to the EAC-5000 through a single coax cable. Using GMSL2 (Gigabit
Multimedia Serial Link) connections, the cameras are connected to a two-port
deserializer. The output of the deserializer is MIPI CSI-2.
2.3.1.5 Remote Power On/Off Switch & Ignition
It is a 3-pin power-on or power-off switch through terminal block. You could turn
on or off the system power by using this contact. This terminal block supports
dual function of soft power-on/power-off (instant off or delay 4 second).
Pin No.
1
2
3
©Vecow EAC-5000 User Manual
Definition
Ignition(IGN)
SW+
SW-
GETTING TO KNOW YOUR EAC-5000/EAC-5100 25