Vecow EAC-5000 User Manual page 24

2.2.1.6 Ethernet Port
There are two 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections on the front side of EAC-5000 series. It supports 1000BASE-T
gigabit data signals over standard Ethernet Cat 5/Cat 6 cable.
LAN Chip
RTL8211_LAN1
I210_LAN2
Using suitable RJ-45 cable, you can connect the system to a computer, or to
any other devices with Ethernet connection, for example, a hub or a switch. The
pin-outs of LAN1 and LAN2 are listed as follows:
Pin No.
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection .
LED Location LED Color
Right
Left
©Vecow EAC-5000 User Manual
RJ-45(10/100/1000)
RJ-45(10/100/1000)
10/100 Mbps
1
2
3
4
5
6
7
8
10Mbps
Green/
Orange
Twinkling
Yellow
Function
E_TX+
E_TX-
E_RX+
------
------
E_RX-
------
------
100Mbps
Solid
Off
Green
Twinkling
Yellow Yellow
GETTING TO KNOW YOUR EAC-5000/EAC-5100
Connector
LAN1
LAN2
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
1000Mbps
Solid
Orange
Twinkling
8
Yellow
1
17