Table of Contents
Advertisement
Audi
adaptive
cruise
control
and braking
guard
• To increase or reduce the speed in increments,
tap the lever up or down.
• To increase or reduce the speed quickly, hold
the lever up or down until the red LED@ reach-
es the desired speed
Qpage 90, fig.
97 .
Following any changes, the new stored speed will
be displayed briefly in the display @ Q page 90,
fig.
97 .
Interrupting cruise control
Applies to: vehicles with Audi adaptive cruise control
Fig. 99 Selec tor lever
Requirement: adaptive cruise control must be
switched on Q
fig. 99 (D.
Overriding cruise control
• To accelerate manually, press the accelerator
pedal. The message
ACC override
appea rs.
• To resume adaptive cruise control, remove your
foot from the gas pedal. The system returns
again to the speed that was saved before.
• You can save a new speed at any time by press-
ing the
ISETI
button Q
page 9, fig. 4 .
Canceling cruise control while driving
• Move the lever into position @ . The message
ACC standby
appears . Or
• press the brake pedal.
• To resume the stored speed, move the lever in-
to position
@ .
A
WARNING
Never resume the stored speed if the speed is
too high for prevailing road, traffic or weather
conditions.
92
Setting the distance
App lies to: vehicles with Audi adap tive cruise con t rol
Fig. 100 Selector lever : setting the distance
.,. Tap the switch to display the current set dis-
tance
Q fig. 100 .
.,. To increase or reduce the distance by incre-
ments, tap the sw itch again to the left or right .
The distance between the two veh icles will
change in the instrument cluster display .
When approaching a moving vehicle up ahead,
the adapt ive cruise control system brakes to
match that object's speed and then mainta ins
the stored distance. If the vehicle ahead acceler-
ates, adaptive cruise control will also accelerate
up to the stored speed .
The higher the speed, the greater the distance in
yards (meters) Q
&..
The Distance 3 setting is
recommended .
The distances provided are spec ified values . De-
pending on the driv ing situation and the how the
vehicle ahead is driving, t he actua l distance may
be more or less than these target distances .
The var ious symbo ls for the time increments ap-
pear briefly in the information line @ Q
page 90,
fig.
9 7 when you change the settings.
o;:'.'.:> _ o;:'.'.:> ___
Distance 1: This setting corresponds
to a distance of 92 feet/28 meters when travel-
ing at 62 mph (100 km/h), or a time interval of 1
second.
o;:'.'.:> __
o;:'.'.:> __
Distance 2: This setting corresponds
to a distance of 1 18 feet/36 meters when travel-
ing at 62 mph (100 km/h), or a time interva l of
1.3 seconds.
.,..
Advertisement
Table of Contents
