Table of Contents
Advertisement
co
co
.....
N
,..._
N
.....
0
~
00
The following buttons are deactivated when the
valet parking function is switched on:
- l'-"' I
button in the dr iver's door
- I""' I
button on the master key
- Handle in the rear lid
When the valet parking feature is activated, the
message Valet parking activated appears in the
instrument cluster display when you switch the
ignit ion on .
Garage
door
opener
(Homelink)
Description
Applies to: vehicles with ga rage door opener (Homeli nk)
Fig. 33 Garage door opener: examples of using with differ-
ent systems
You can activate var ious systems such as garage
doors, security systems and home light ing from
inside your vehicle using the garage door opener
(Homelink) . There are three buttons for this in
the vehicle headliner that can be in used in place
of up to three hand-held transmitters.
To operate systems using the garage door open-
er, the three buttons in the roof headli ner must
be programmed first .
A
WARNING
Make sure no people or objects are in the im-
mediate vicin ity of the equipment when using
or programming the garage door opener. Peo-
ple can be injured and objects can be dam-
aged if they are caught in the equipment.
Open in g and closing
(D
Tips
- For security reasons, we recommend that
you clear the programmed buttons before
selling the vehicle.
- For additiona l information about Homelink •
visit www.homelink.com.
- For Declaration of Compliance to United
States FCC and Industry Canada regulations
¢ page 249.
Operation
Applies to : vehicles wit h garage door ope ner (Home link)
Fig. 34 He ad liner : control un it
Requirement: The buttons in the roof headliner
must be programmed ¢ page
39
or
¢
page
39
and the vehicle must be within
range of the system, such as the garage door
opener.
.,. Press the button to open the garage door. The
LED@ blinks or turns on .
.,. Press the button again to close the garage
door.
(D
Tips
To open or close the garage door, press the
button, but do not hold it for longer than
10 seconds or the garage door opener module
will switch to programming mode .
Programming the buttons (version A)
Applies to: vehicles wit h garage door ope ner (Home link)
You can program both fixed code and rolling code
systems using this procedure .
..,.
39
Advertisement
Table of Contents
