Table of Contents
Advertisement
co
co
.....
N
,-...
N
.....
0
~
00
the windshield in this area in order to
prevent malfunctions or failures .
- Some exterior lighting functions can be ad-
justed
c:,
page 43.
- When you remove your key from the igni-
tion while the vehicle's lights are turned on,
a buzzer sounds as long as the driver's door
is open.
- In cool or damp weather, the inside of the
headlights, turn signals and tail lights can
fog over due to the temperature
difference
between the inside and outside. They will
clear shortly after switching them on. This
does not affect the serv ice life of the light-
ing .
- In the event of a light sensor malfunction,
the driver is notified in the instrument clus-
ter display
c:,
page 19.
Turn signals and high beam lever
The lever operates the turn signals, the high
beams and the headlight flasher.
Fig. 37 Turn signal and high beam l ever
Turn signals¢¢
g
N
0
~
CD
The turn signals activate when you move the lev-
er into a turn signal position when the ignition is
switched on.
@ -
right turn signal
@ -
left turn signal
The turn signal blinks three times if you ju st tap
the lever.
High beams and headlight flasher
~D
Move the lever to the corresponding position:
@ -
high beams on
Lights
and Vision
@ -
high beams off or headlight flasher
The indicator light
II
in the instrument cluster
turns on.
Notes on these features
- The
turn signals
only work with the ignition
turned on. The indicator lights .
or
II
in the
instrument cluster also blink.
- After you have turned a corner, the turn signal
switches off automatically.
- The
high beam
works only when the headlights
are on. The indicator light
II
in the instrument
cluster illuminates when the high beams are
on.
- The
headlight flasher
works only as long as you
hold the lever - even if there are no lights
switched on . The indicator light
II
in the in-
strument cluster illuminates when you use the
headlight flasher.
WARNING
Do not use the high beam or headlight flasher
if you know that these could blind oncoming
traffic.
Adjusting exterior lighting
The functions are selected in the radio or MMI* .
.,. Select:
!CAR I
function button>
Exterior light-
ing . Or
.,. Select:
1- C ~ A ~ R -.l
function button >
Car systems*
control button >
Vehicle settings
>
Exterior
lighting .
Coming home (light when leaving car)*,
Leaving home (light when unlocking car)*
The
coming home
function illuminates the area
around the vehicle when the ignition is switched
off and the driver's door is opened. Depending on
vehicle equipment, the function can be switched
on and off or the length of time the lights remain
on* can be adjusted .
The
leaving home
function illuminates the area
around the vehicle when unlocking it. This func-
tion can be switched on and off.
ll>
43
Advertisement
Table of Contents
