3.
CONFIGURATION
3.1.
EXAMPLE CONFIGURATION
The setup of Figure 3-1 will be used to demonstrate how to configure the 7700S2IP-RCL.
Figure 3-1 contains the following elements:
•
A primary RCL router controller with a system controller installed in slot 1.
controller has IP address 192.168.18.39. It controls the primary RCL router. The primary RCL
router has destination names Out1P, Out3P, Out5P, Out7P, and Out9P and source names
In1P, In3P, In5P, In7P, In9P, In11P, In13P, In15P within area name area.
7700S2IP-RCL QMC-2 To RCL Translator
Figure 3-1: Example Setup
Revision 2.0
7700 MultiFrame Manual
The system
Page-3