Step 8: Associate Controller Destinations With Qmc-2 Inputs - evertz 7700 Manual

7700 MultiFrame Manual
7700S2IP-RCL QMC-2 To RCL Translator
3.9.

STEP 8: ASSOCIATE CONTROLLER DESTINATIONS WITH QMC-2 INPUTS

1. From the VLPro configuration view, click the QMC-2 Interface tab.
2. Use the QMC-2 Input and Destination combo boxes to associate a controller destination with a
QMC-2 input.
connected to the Preset input for the primary and secondary controller respectively. Clicking the
primary's Destination combo box allows us to select Out3P. Clicking the QMC-2 Input combo
box allows us to select Preset. This is shown in Figure 3-19.
Page-20
Figure 3-18: QMC-2 Interface Parameters
For instance, our example requires destination Out3P and Out3S to be
Revision 2.0