3.10.
STEP 9: SELECT CONTROLLER SOURCES
1. From the VLPro configuration view, click the QMC-2 Interface tab.
2. Use the Source and Number combo boxes, along with the Set button, to specify the controller
sources to be used by the QMC-2.
3. Specify the control source aliases.
4. Click the icon to the right of Apply.
Make the controller sources contiguous.
Figure 3-23: Selecting Controller Inputs
Revision 2.0
7700 MultiFrame Manual
7700S2IP-RCL QMC-2 To RCL Translator
Page-25