Table of Contents
Advertisement
Quick Links
1.
OVERVIEW.......................................................................................................................................... 1
2.
INSTALLATION................................................................................................................................... 4
2.1. AES AUDIO AND AUXILLIARY I/O............................................................................................ 5
2.1.1. Connecting the AES Outputs .......................................................................................... 6
2.1.2. Connecting the RS232/422 Serial Data Port................................................................... 6
2.1.3. Connecting the GPI Inputs and GPO Outputs................................................................. 6
2.2. INSTALLING THE BULKHEAD BREAKOUT PANEL ............................................................... 7
2.2.1. Connecting the Breakout Panel AES Outputs................................................................. 8
2.2.2. Connecting the Breakout Panel RS232/422 Serial Data Port ......................................... 8
2.2.3. Connecting the Breakout Panel GPI Inputs and GPO Outputs ....................................... 9
2.3. CARE AND HANDLING OF OPTICAL FIBER............................................................................ 9
2.3.1. Safety .............................................................................................................................. 9
2.3.2. Assembly......................................................................................................................... 9
2.3.3. Labeling......................................................................................................................... 10
2.3.4. Handling and Connecting Fibers ................................................................................... 10
3.
SPECIFICATIONS............................................................................................................................. 11
3.1. OPTICAL INPUT/OUTPUT ....................................................................................................... 11
3.2. SERIAL VIDEO OUTPUTS ....................................................................................................... 11
3.3. AES AUDIO OUTPUTS ............................................................................................................ 12
3.4. SERIAL DATA PORT ............................................................................................................... 12
3.5. GENERAL PURPOSE INPUTS ................................................................................................ 12
3.6. GENERAL PURPOSE OUTPUTS ............................................................................................ 12
3.7. SYSTEM PERFORMANCE ...................................................................................................... 12
3.8. ELECTRICAL ........................................................................................................................... 13
3.9. PHYSICAL ................................................................................................................................ 13
4.
STATUS INDICATORS AND DISPLAYS ......................................................................................... 14
4.1. STATUS INDICATOR LEDS..................................................................................................... 14
4.2. DOT-MATRIX DISPLAY ........................................................................................................... 14
TABLE OF CONTENTS
:............................................................................................................................. 13
7707MR Multi-Signal SDTV Fiber Receiver
Revision 2.0
7700 MultiFrame Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for evertz 7700
Summary of Contents for evertz 7700
-
Page 1: Table Of Contents
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver TABLE OF CONTENTS OVERVIEW............................1 INSTALLATION........................... 4 2.1. AES AUDIO AND AUXILLIARY I/O.................... 5 2.1.1. Connecting the AES Outputs ..................6 2.1.2. Connecting the RS232/422 Serial Data Port..............6 2.1.3. Connecting the GPI Inputs and GPO Outputs..............6 2.2. - Page 2 7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 4.2.1. Displaying the Link Activity.................... 15 4.2.2. Setting the Headphone Jack Channel................15 4.2.3. Displaying the Optical power..................15 4.2.4. Displaying the Video Standard ..................16 4.2.5. Displaying the Audio Sample Rate................16 4.2.6.
- Page 3 7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 7.3. V LINK CONTROLLED PARAMETERS ................27 ISTA ® Figures Figure 1-1: 7707MR (-F2) Block Diagram ......................3 Figure 2-1: 7707MR Rear Panels..........................4 Figure 2-2: Breakout Panel for Wiring Connections....................7 Figure 2-3: Reproduction of Laser Certification and Identification Label ............10 Figure 6-1: Location of Jumpers –...
- Page 4 Nov 08 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied.
- Page 5 7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver WARNING Never look directly into an optical fiber. Non-reversible damage to the eye can occur in a matter of milliseconds. Do not hook up the 7707MR DWDM cards directly with a short fiber optic cable.
- Page 6 7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver This page left intentionally blank Revision 2.0...
-
Page 7: Overview
Time Domain Multiplexed (TDM) by the companion 7707MT Multi-Signal Fiber Transmitter module. Evertz’s patent pending SoftSwitch™ technology is applied to the received signal to ensure virtually glitch free AES Audio output signals when upstream SDI or AES feeds are switched. -
Page 8: Table 1-1: Typical Application Configurations
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver Different versions of the 7707MR allow the user to choose the optimal function / price / performance ratio to suit a particular application. Versions with no suffix are the lowest cost, but have higher insertion losses as they receive and transmit on the same wavelength (1310nm) over a single fiber. -
Page 9: Figure 1-1: 7707Mr (-F2) Block Diagram
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver Vista LINK ® Interface CONTROL/ Data LOCAL LOCAL INDICATION Clock INDICATION CONTROL SDI Video Output Data Alignment SDI Video Output Fiber Input Optical AES 1 AES Audio (Dual Fiber -F2 Version) Receiver... -
Page 10: Installation
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver INSTALLATION The 7707MR comes with a companion rear plate that has two BNC connectors, one high-density female DB15 connector and one SC/PC, SC/PC with cover (shown), ST/PC or FC/PC optical connector. For information on mounting the rear plate and inserting the module into the frame see the 7700FR chapter section 3. -
Page 11: Aes Audio And Auxilliary I/O
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver Dual Fiber (-F2) Version FIBER IN: There is one SC/PC (shown), ST/PC or FC/PC female connector with the optical input to the module. This connector should be connected to the FIBER OUT connector of a dual fiber 7707MT module at the destination end with a suitable fiber optic cable. -
Page 12: Connecting The Aes Outputs
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 2.1.1. Connecting the AES Outputs AES OUTPUT: 4 Pins on DB15 connector are used to carry balanced AES audio outputs for channels 1&2 (AES 1) and 3&4 (AES 2) of an audio group. Each output occupies two pins (+, -) on the DB15 with a shared GND pin. -
Page 13: Installing The Bulkhead Breakout Panel
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 2.2. INSTALLING THE BULKHEAD BREAKOUT PANEL The 7707MX-BHP Bulkhead breakout panel is an accessory that provides the user with a convenient way of connecting the audio, RS232/422 and GPIO signals into the HD DB-15 connectors on the rear of the modules. -
Page 14: Connecting The Breakout Panel Aes Outputs
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 2.2.1. Connecting the Breakout Panel AES Outputs BALANCED AES OUTPUTS: For Balanced AES signals connect the + and – signals to the respective output pins on the AES terminal strip. The AES Term Jumpers J30 and J31 must be set to the 110 position for proper source impedance of the balanced AES outputs. -
Page 15: Connecting The Breakout Panel Gpi Inputs And Gpo Outputs
2.3.1. Safety CLASS 1 LASER PRODUCT Background colour: yellow Triangular band: black Symbol: black 2.3.2. Assembly Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by qualified Evertz technical personnel. 7707MR-9 Revision 2.0... -
Page 16: Labeling
5 cm to avoid fiber-bending loss that will decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic modules come with cable lockout devices, to prevent the user from damaging the fiber by installing a module into a slot in the frame that does not have a suitable I/O module. -
Page 17: Specifications
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver SPECIFICATIONS 3.1. OPTICAL INPUT/OUTPUT Number: 1 (Single fiber version) 2 (Dual fiber - F2 version) Connector: Female SC/PC, ST/PC or FC/PC Return Loss: > 20dB Rise and Fall Time: 200ps nominal Max. Input Power:... -
Page 18: Aes Audio Outputs
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 3.3. AES AUDIO OUTPUTS Standard Unbalanced AES: SMPTE 276M Balanced: AES3-1992 Other: Dolby-E™ compatible Number of Outputs: 2 regenerated (Jumper selectable for balanced or unbalanced) Connector: 4 pins on female high density DB-15... -
Page 19: Electrical
+12V DC Power: 12 Watts (Non DWDM) 14 Watts (DWDM) 3.9. PHYSICAL 7700 or 7701 frame mounting: Number of slots: 1 3.10. COMPLIANCE: Electrical Safety: CSA Listed to UL 60065-03, IEC 60065 Complies with CE Low voltage Directive Laser Safety: Class 1 laser product Complies with 24 CFR 1040.10 and 1040.11... -
Page 20: Status Indicators And Displays
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver STATUS INDICATORS AND DISPLAYS The 7707MR has 6 LED Status indicators and a 4 digit alphanumeric display on the front card edge to show operational status of the card at a glance. The card edge pushbutton is used to select various displays on the alphanumeric display. -
Page 21: Displaying The Link Activity
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver The following display messages indicate what is being displayed: Loss of optical link LINK ERR Set headphone jack audio channel AJCK Input optical power Video standard in use VSTD Clock rate in use on AES1... -
Page 22: Displaying The Video Standard
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 4.2.4. Displaying the Video Standard The 7707MR detects the video standard of the input signal and displays this on the four-digit card edge display. The following list describes possible displays and their meaning: SMPTE 259M-C, 270 Mb/s 4:2:2 Component 525 line. -
Page 23: Displaying The State Of The General Purpose Outputs
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 4.2.7. Displaying the State of the General Purpose Outputs The GPO1 and GPO2 displays show the current state of the General Purpose outputs. The General Purpose outputs can be configured for normally closed or open using jumpers on the I/O assembly (please see section 6.10). -
Page 24: Card Edge Controls
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver CARD EDGE CONTROLS The 7707MR is equipped with a three position, return to center toggle switch that is used to select the various card edge displays and is also used in conjunction with a momentary pushbutton to select some sub-items of the displays. -
Page 25: Setting The Aes Sample Rate
Table 5-3: AES Sample Rate Switch Settings 5.2.3. Disabling the Audio SoftSwitch™ Feature The 7707MR is equipped with Evertz’s patent pending SoftSwitch™ technology, which mitigates audio pops during hot-switching while maintaining consistent video and audio sequences and formats. DIP switch 4 controls whether SoftSwitch™ is enabled or not. -
Page 26: Jumpers
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver JUMPERS GPO1 GPO2 Figure 6-1: Location of Jumpers – I/O Module TOGGLE SWITCH LOCAL FAULT MODULE OK AES 1 PRESENT AES 2 PRESENT DATA ACTIVITY DATA ACTIVITY DISPLAY PUSH BUTTON SELECT AES1... -
Page 27: Selecting Whether Local Faults Will Be Monitored By The Global Frame Status
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 6.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED BY THE GLOBAL FRAME STATUS The FRAME STATUS jumper J4 determines whether local faults (as shown by the Local Fault indicator) will be connected to the 7700FR frame's global status bus. -
Page 28: Selecting The Default Behaviour Of The Inputs When There Is No Signal Connected
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver A 7707MT/7707MR pair can be configured to interface between a bus-controller and a tributary if configured as follows: Controller Transmitting Receiving 7707MR Tributary DB9 PIN # 7707MT DB15 PIN # DB15 PIN # DB9 PIN # 6.4. -
Page 29: Configuring The Module For Firmware Upgrades
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 6.6. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES UPGRADE: The UPGRADE jumper J5 is used when firmware upgrades are being done to the module. For normal operation it should be installed in the RUN position. -
Page 30: Selecting Normally Open Or Closed Gpos
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver + 12 220 Ohm Current internal Limiter circuit Command Figure 6-4: GPI Input Circuitry 6.10. SELECTING NORMALLY OPEN OR CLOSED GPOS The GPO1 and GPO2 jumpers J13 and J14, located on the I/O assembly select whether the general purpose output relay contacts will be open or closed when they are active. -
Page 31: Vistalink Remote Monitoring/Control
1. An SNMP manager, also known as a Network Management System (NMS), is a computer running special software that communicates with the devices in the network. Evertz VL-Fiber demo Manager graphical user interface (GUI), third party or custom manager software may be used to monitor and control Evertz VistaLINK enabled fiber optic products. -
Page 32: Vistalink Monitored Parameters
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 7.2. VistaLINK MONITORED PARAMETERS ® The following parameters can be remotely monitored through the VistaLINK interface. ® Parameter Description Indicates presence of a valid optical link with a 7707MT Link OK module. -
Page 33: Link ® Controlled Parameters
7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver 7.3. VistaLINK CONTROLLED PARAMETERS ® The following parameters can be remotely controlled through the VistaLINK interface: ® Parameter Description Enables video output to be black or blue on loss of input fiber... - Page 34 7700 MultiFrame Manual 7707MR Multi-Signal SDTV Fiber Receiver This page left intentionally blank 7707MR-28 Revision 2.0...
Need help?
Do you have a question about the 7700 and is the answer not in the manual?
Questions and answers