Table of Contents
Advertisement
4.
FIRMWARE UPGRADE
There are two ways to upgrade 7700S2IP-RCL firmware:
1.
Using FTP to perform the upgrade via TCP/IP. (recommended procedure)
2.
Using a terminal application such as HyperTerminal to perform the upgrade via a serial
connection.
4.1.
FTP
1. Open a command prompt window (in Windows: Start/Programs/Accessories/Command Prompt)
2. Enter the location of the firmware file. For example, type cd c:\temp.
3. Enter the command ftp followed by the 7700S2IP-RCL IP address.
For example, type ftp –A 192.168.18.22.
4. Enter the FTP command put followed by the firmware file name. For example, put 7700S2IP-
RCL.bin.
5. When the transfer is complete enter the FTP command: bye.
6. Step 5 begins the process of saving the firmware to the non-volatile flash of the 7700S2IP-RCL.
The save process is displayed as a percentage on the 7700S2IP-RCL LCD. Once the process
is complete, the 7700S2IP-RCL LCD again displays the product name and firmware version.
7. Power off the 7700S2IP-RCL.
8. Power on the 7700S2IP-RCL.
4.2.
SERIAL
1. Power off the 7700S2IP-RCL.
2. Connect an adapter cable to a PC running a console or terminal application, such as Windows
HyperTerminal, to the 7700S2IP-RCL debug/monitor port.
3. Configure the port settings of the terminal program as follows:
4. Set the 7700S2IP-RCL run/upgrade jumper to the upgrade position.
5. Power on the 7700S2IP-RCL.
6. After a few moments, the prompt PPCBOOT> will appear. Enter the command upload.
7. Start the firmware upload on the terminal application (for instance, in HyperTerminal select
Transfer/Send File...), use Xmodem as the transfer protocol, and select the firmware file. For
example, 7700S2IP-RCL.bin.
8. Once the upload is complete the message upload okay is displayed.
9. Power off the 7700S2IP-RCL.
10. Set the 7700S2IP-RCL run/upgrade jumper to the run position.
11. Remove the serial adapter cable.
12. Power on the 7700S2IP-RCL.
Baud
115200
Parity
no
Data bits
8
Stop bits
2
Flow Control
None
Revision 2.0
7700 MultiFrame Manual
7700S2IP-RCL QMC-2 To RCL Translator
Page-27
Advertisement
Table of Contents
