evertz 7700 Manual page 20

7700 MultiFrame Manual
7700S2IP-RCL QMC-2 To RCL Translator
5. Optionally, enter the name of the video level used by the secondary controller. The level name
is case sensitive. If no level is specified then the 7700S2IP-RCL will indicate all levels when
issuing the crosspoint switch request.
6. Enter the IP address of the primary system controller in slot 1. As per our example, this is
192.168.18.39.
7. Enter the IP address of the secondary system controller in slot 1. As per our example, this is
192.168.18.40.
8. By default, the system controllers listen on TCP port 12345 for incoming connection requests. If
this value has been modified, then the appropriate TCP port needs to be specified for the
system controllers.
9. Click the icon to the right of Apply.
10. Click the icon to the right of Refresh.
Page-16
Revision 2.0