Installation; Figure 2-1: 7705Eo Rear Panels - evertz 7700 Manual

2.

INSTALLATION

The 7705EO comes with a companion rear plate that has three BNC connectors and one SC/PC (shown),
ST/PC or FC/PC optical connector. For information on mounting the rear plate and inserting the module
into the frame see section 3 of the 7700FR chapter.
SDI INPUT: Input BNC connector for 10-bit serial digital video signals compatible with the
SMPTE 259M, DVB-ASI or SMPTE 310M standard. See section 5.1 for information on
selecting the correct video standard.
SDI OUTPUT: There are two BNC connectors with reclocked serial component video outputs, compatible
with the SMPTE 259M, DVB-ASI or SMPTE 310M standard.
There is one SC/PC (shown), ST/PC or FC/PC female connector with reclocked serial
component video outputs, compatible with the SMPTE 259M, DVB-ASI or SMPTE 310M
standard. This connector is the optical output from the 7705EO as shown in section 3.3.
7705EO SDI Electrical to Optical Converter, 19.4Mb/s or 143-540Mb/s

Figure 2-1: 7705EO Rear Panels

Revision 1.8
7700 MultiFrame Manual
7705EO - 3