Setting The Station Id - Brother MFC-5440CN User Manual

Setting the Station ID
You should store your name or company name and fax number so
they print on all fax pages you send.
1 Press Menu/Set, 0, 3. I Initial
Setup
2
Enter your fax number (up to 20
I 3.
Station ID
digits).
Press Menu/Set.
_You cannot enter a hyphen in the fax number. To enter a space
press _ once between numbers.
3 Use the dial pad to enter your name (up to 20 characters).
(See Entering Texton page B-12.)
Press Menu/Set.
4 Press Stop/Exit.
If the Station ID has already been programmed, the LCD will ask
you to press 1 to make a change or 2 to exit without changing.
]
................................ NOTICE (For USA) ................................................
The Telephone Consumer Protection Act of 1991 makes it unlawful
for any person to use a computer or electronic device to send any
message via a telephone fax machine unless such messages
clearly contain, in a margin at the top or bottom of each transmitted
page, or on the first page of the transmission, the date and time it
is sent and an identification of the business or other entity or other
individual sending the message and the telephone number of the
sending machines or such business, other entity or individual.
To program this information into your MFC, see Setting the Date
and Time on page 2-1 and Setting the Station ID on page 2-2.
2 - 2 GETTING STARTED