Brother MFC-5440CN User Manual page 22

@
Fax and Telephone keys:
Hook
Press before dialing if you want to
make sure a fax machine will
answer, and then press Black Start
or Color Start.
Redial/Pause
Redials the last number you called.
It also inserts a pause in quick dial
numbers.
Fax Resolution
Sets the resolution when you send a
fax.
Copy keys
(Temporary settings):
Options
You can quickly and easily select
temporary settings for copying.
Quality
Use this key for temporary copy
settings.
Enlarge/Reduce
Lets you enlarge or reduce copies
depending on the ratio you select.
Paper Type (MFC-5440CN only)
You can select which type of paper
you want to use for the next copy.
Tray Select (MFC-5840CN only)
You can select which tray you want
to use for the next copy.
Dial Pad
Use these keys to dial telephone or
fax numbers and as a keyboard for
entering information into the MFC.
The # key lets you temporarily
switch the dialing mode during a
telephone call from Pulse to Tone.
@
@
Mode keys:
Fax
Lets you access Fax mode.
Scan
Lets you access Scan mode.
Copy
Lets you access Copy mode.
Stop/Exit
Stop/Exit
Stops an operation or exits from the
menu.
CoHor Start
Color Start
Lets you start sending faxes or
making copies in full color.
Also lets you start a scanning
operation (in color or black,
depending on the scanning setting
on your PC).
Bmack Start
Black Start
Lets you start sending faxes or
making copies in black and white.
Also lets you start a scanning
operation (in color or black,
depending on the scanning setting
on your PC).
On/Off
You can turn the MFC on or off.
Also, you can set the On/Off Setting
so the MFC can still receive faxes
when it is turned off.
INTRODUCTION 1 - 3