Brother MFC-5440CN User Manual page 131

ERROR MESSAGES x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
ERROR CAUSE ACTION
MESSAGE
No The number you dialed does not Verify the number and try again.
Response/Busy
answer or is busy.
Not You tried to access a Speed Dial Set up the Speed Dial number.
Registered number that is not programmed. (See Storing Speed-Dial numbers on page
5-1 .)
Document Jam The document scanned from ADF See Using the automatic document feeder
was longer than about 35.4 (ADF) on page 1-7.
inches.
The document is jammed in the See Document jams on page 11-5.
MFC.
Out of Hemory
The MFC's memory is full.
Paper Jam Paper is jammed in the MFC.
Wrong Paper Paper is not the correct size.
Size
(Fax sending or copy operation in process)
Press Stop/Exit and wait until the other
operations in progress finish and then try again.
--OR--
Clear the data in the memory. To gain extra
memory, you can turn off Fax Storage.
(See Setting Fax Storage on page 6-3.)
--OR--
Print the faxes that are in the memory.
(See Printing a fax from the memory on page
4-5.)
(Printing operation in process)
Reduce print resolution.
(See Printer jam orpaperjam on page 11-6.)
Reload the correct size of paper (Letter, Legal
or A4), and then press Black Start or
Color Start.
11 -3 TROUBLESHOOTING AND ROUTINE MAINTENANCE