Programming Your Pager Number - Brother MFC-5440CN User Manual

Programming your pager number
When Paging is selected, your MFC dials the pager number you've
programmed, and then dials your Personal Identification Number
(PIN). This activates your pager so you will know that you have a fax
message in the memory.
1 Press Menu/Set, 2, 5, 1.
2
Press • or • to select Paging.
3 Enter your pager phone number
followed by # # (up to 20 digits).
Press Menu/Set.
Remote Fax Opt ]
l.Fwd/Page/Store
Do not include the area code if it is the same as that of your MFC.
For example, press 1 8 0 0 5 5 5 1 2 3 4 ##.
4[ If your pager needs a PIN, enter the PIN, press #, press
Redial/Pause, enter your fax number followed by # #.
Press Menu/Set.
(For example, press 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5
1212##)
--OR--
If you do not need a PIN, press Redial/Pause, enter your fax
number followed by # #.
Press Menu/Set.
(For example, press Redial/Pause 1 8 0 0 5 5 5 1 2 1 2 # #)
5 Press Stop/Exit.
_f [] You cannot change a Paging number or PIN remotely.
[] If you have set Paging, a backup copy of the received fax will
automatically be printed at the MFC.
REMOTE FAX OPTIONS 6- 2