Fax; Before Faxing; Set Your Station Id; Telephone Line Interference/Voip - Brother MFC-J775DW Basic User's Manual

6

Fax

Before Faxing

Set Your Station ID

Set the machine's Station ID if you want the
date and time to appear on each fax you
send.
1
Press Settings.
2
Press a or b to select the following:
a. Select [Initial Setup].
Press OK.
b. Select [Station ID]. Press OK.
3
Enter your fax number (up to 20 digits)
using the dial pad, and then press OK.
4
Enter your name (up to 20 characters)
using the dial pad, and then press OK.
For more information about how to enter
text, see the Appendix.
5
Press Stop/Exit.
NOTE
(USA only)
The Telephone Consumer Protection Act of
1991 makes it unlawful for any person to use
a computer or electronic device to send any
message via a telephone fax machine unless
such messages clearly contain, in a margin at
the top or bottom of each transmitted page, or
on the first page of the transmission, the date
and time it is sent and an identification of the
business or other entity or other individual
sending the message and the telephone
number of the sending machines or such
business, other entity or individual.
Telephone Line Interference/
VoIP
If you are having problems sending or
receiving a fax due to possible interference on
the telephone line or if you are using a VoIP
system, we recommend changing the modem
speed to minimize errors in fax operations.
1
Press Settings.
2
Press a or b to select the following:
a. Select [Initial Setup].
Press OK.
b. Select [Compatibility].
Press OK.
c. Select [Normal] or [Basic(for
VoIP)]. Press OK.
• [Basic(for VoIP)] reduces
the modem speed to 9,600 bps
and turns off color fax receiving
and ECM, except for color fax-
sending. Unless interference is a
recurring problem on your
telephone line, you may prefer to
use it only when needed.
To improve compatibility with
most VoIP services, Brother
recommends changing the
compatibility setting to
[Basic(for VoIP)].
• [Normal] sets the modem
speed at 14,400 bps.
3
Press Stop/Exit.
20