Audio Channels Processing (-A4); Configuring The Video Controls - evertz 7700 Manual

Composite encoder with image enhancement

Hide thumbs Also See for 7700:

Table of Contents

7700 MultiFrame Manual

7737CE Composite Encoder with Image Enhancement

Audio

Ch1 adjust

12 to 24

6.4.6. Audio Channels Processing

There are 4 menu items to adjust the routing and processing of the audio outputs. For simplicity only the

menu for channel 1 will be shown in the manual.

Audio

Ch1 processing

Ch1

Ch2

Ch3

Ch4

(Ch1+Ch2)/2

(Ch3+Ch4)/2

Mute

6.5.

The Video menus are used to configure parameters associated with the video processing functions. The

chart below shows the items available in the Video menu. Sections 6.5.1 to Error! Reference source not

found. give detailed information about each of the parameters.

7737CE-14

The channel output level is adjusted with this control. It has a range of

approximately 12 dB with 1/10 dB resolution. The displayed value is the analog

output level (dBu) corresponding to a 0dB FS digital input signal.

Basic audio channel manipulation is possible with this control.

Any input channel can be routed to any output channel. A mono mix of either

L/R input pair can also be performed. Muting an output is also possible.

Revision 1.0

Table of Contents

7737ce