Table of Contents
Advertisement
4.2. Torque Adjustment
For an external torque adjustment use the following steps:
1.
Disconnect the screwdriver from the air supply.
2.
Insert the supplied hand screwdriver 326240 through one of the slots on
the motor housing into the half-round bore of the lock ring (if necessary,
turn bit by hand).
3.
By turning the hand screwdriver clockwise (-), the torque is reduced and
if turned counter-clockwise (+), the torque is increased.
Picture: Torque Adjustment
half-round bore for
hand screwdriver 326240
14
Advertisement
Table of Contents
