Table of Contents
Advertisement
4.2. Torque Adjustment
For an external torque adjustment use the following steps:
1.
Disconnect the screwdriver from the air supply.
2.
Insert the supplied hand screwdriver 326240 through one of the slots on
the motor housing into the half-round bore of the lock ring (if necessary
turn bit by hand).
3.
By turning the hand screwdriver 326240 clockwise (-), the torque is re-
duced and by turning it counter-clockwise (+), the torque is increased.
half-round
bore for hand
screwdriver
Picture: Torque Adjustment
14
Advertisement
Table of Contents
