Special Repair Tools (Optional Equipment) - Deprag MINIMAT 347-210-31UL Operating Instruction Booklet

Assembly:
Use the DEPRAG Grease 807293 (100-g tube) to grease the
ball bearing, needle bearing and gearing parts prior to
reassembly.
a. Clean rotor.
b. Press the ball bearings into the two bearing covers.
c. Press the shaft-side bearing cover with the ball bearing on the rotor.
d. Insert the new vanes into the rotor.
e. Put the rotor cylinder over the rotor.
After assembly the bearing covers shouldn't have any axial
gap. The rotor must turn freely.
f. Press air-connecting side bearing cover with the ball bearing on the
rotor.
For remaining assembly proceed logically in reverse order with reference to
disassembly!
NOTICE
Preassemble the motor housing 3988561 by hand and do not
tighten excessively.
Tighten the valve housing 401130 using a tightening torque of
25 Nm / 220 in.lbs.

5.1. Special Repair Tools (Optional Equipment)

N
AME
Fixing device
Arbor
Press-in device
Plier
Assembly arbor
Chucking jaws
Spanner AF 19
U
SAGE
for rotor cylinder
to disassemble bearing cover with groove ball
bearing
to press the intermediate pinion 328139 into
gear support
for clutch bearing 398861
to assemble circlip 800248 onto spindle 351888 461292
for motor housing
for motor housing
19
P N .
ART O
460762
462329
461224
4612961
461498
800408