Table of Contents
Advertisement
Button Operation Model 5003
2
1
Figure 2 shows the control buttons on the touch screen of the gas analyzer:
1.
The "Zero" button has two functions.
a. Zeroing the gas analyzer as needed during use.
b. Restarting the pump following automatic shutdown.
2.
The "Home" button has one function.
a. Brings you back to Gas Sample screen
3.
The "Menu" button has several functions.
a. Access calibration screen
b. Change Fuel Type
c. Change display to 4 or 5 Gas
d. Leak Check for sample system
e. Maintenance Log
f. Access Status for ERROR message screen
e. Access Set Up to Check bench SN and PEF Value or enter activation code,
choose WiFi mode; Host or Client mode and Ethernet cable configuration.
4.
The "Help" button is used to access the operations manual for touch screen operation,
maintenance info.
5.
The "Contact" button is for all the EMS shipping info, phone and website.
6.
The "Setting Window" is for viewing what fuel type is picked (default is gasoline) and
for 4 or 5 gas setting for reading NOX.
7.
The "15 Min Shutdown" is for stand by mode or end of the day shutdown, once the
button is depressed the pumps will run for 15 min. and shutdown pumps.
3
6
Figure 2
5
4
5
7
Advertisement
Table of Contents
