EMS 5003 Operator's Manual page 20

WIFI CLIENT MODE SCREEN
The WiFi CLIENT MODE function allows you to connect to the analyzer wirelessly for Data Acqui-
sition with a Dyno or other software with the EMS5003 protocol to collect and control the analyzer.
1) When WiFi Client mode is selected, the main Client mode screen will appear to allow
you to connect automatically "DHCP" or manually "Static" ( Figure 41).
2) Press the Scan button, and the WiFi will search for available networks ( Figure42).
3) Once the Scanning is gone, press the WiFi Network box ( Figure 42). This will open a
window showing available WiFi networks ( Figure 43), choose your network and press the
close button.
4) Once you choose your network, press the Passphrase ( or Key) box ( Figure 44), this will
open a keypad window ( Figure 45), press clear and enter your network password key, press
"ENT" enter and you will be back at the client mode screen (Figure 44)
Figure 41
Figure 43
Figure 45
Figure 42
Figure 44
20