Table of Contents
Advertisement
Congratulations on your purchase of an EMS Exhaust Gas Analyzer. This product is de-
signed to assist you in the process of diagnosing driveability issues. With proper care and main-
tenance this product will provide accurate information for many years to come.
IMPORTANT NOTE: Moisture is the biggest concern for prolonged good operation of the gas
analyzer. Always allow the analyzer to dry out by running the unit with ambient air. This may take only
one auto shut down cycle or as much as a couple hours! The analyzer will not be harmed by powering up
and letting it sit in standby mode till ready to use. Running the analyzer with ambient air in-between
sampling and after a day of testing, is the best thing to do for prolonged life of the bench and compo-
nents not allowing carbon build up due to moisture!
Figure 1 highlights the features and buttons available on the Model 5003 front display
area. The HC will display up to five digits and is in ppm, CO is in percentage, CO2 is in percent-
age, NOX is in ppm, O2 is in percentage, LAMBDA and AFR. The buttons will be described
later in this manual.
ZEROING
BUTTON
HOME
BUTTON
General Information
Figure 1
MENU
BUTTON FUEL & 4
OR 5 GAS
SETTING
WINDOW
HELP
BUTTON
4
CONTACT
BUTTON
15 min.
SHUT
DOWN
BUTTON
Advertisement
Table of Contents
