Button Operation Model 5002 - EMS 5002 Operator's Manual

Button Operation Model 5002

Figure 2 shows the control buttons on the front of the gas analyzer:
1. The "Zero" button has two functions.
a. Zeroing the gas analyzer as needed during use.
b. Restarting the pump following automatic shutdown.
2. The "Menu" button has several functions.
a. Access calibration screen
b. Change between AFR/Lamda
c. Access ERROR message screen
3. The "Print" button is used to print a snapshot of gas reading information. A parallel
printer will need to be connected to the 25 pin connector on the back of the analyzer.
4. The "B/L" button is used to turn the back light off and on. The back light default is in
the on position for all screens. You can turn the back light off on the main sampling
screen only.
1 2 3
Figure 2
5
4