Optex FASTUS CD22-15 Series Instruction Manual page 4

cLNP
ALrN
hoLD
hdct 0000
hoLD
YES
rESt
no
on
diSP
oFF
Extension mode
Extension mode is chosen by pressing "+" and "-" buttons at a time for 1 second.
Parameters in Extension mode must be set correctly otherwise it might not work correctly.
Please use with default setting when changing parameters is not needed. ( " * " means default setting)
hYSt 0. 1 23
NtoP NAH
Pt5
Pt4
Pt3
Pt2
Pt1
thrE
bASE
P400
P200
P100
tout off
100N
SaNp
inct
1
256
2Ero
0. 1 23
Auto
SEnS
N__6
N__1
Ramco Innovations (800) 280-6933 www.optex-ramco.com nsales@ramcoi.com
Miscellaneous function
hdct
Attention: Not to be Used for Personnel Protection.
Never use these products as sensing devices for personnel protection. Do-
ing so could lead to serious injury or death. These sensors do not include
the self-checking redundant circuitry necessary to allow their use in per-
sonnel safety applications. A sensor failure or malfunction can cause either
an energized or de-energized sensor output condition.
Please consult our distributors about safety products which meet OSHA,
ANSI and IEC standards for personnel protection.
0. 0 00
Loc
Loc
uLoc
http://www.optex-fa.com/rohs_cn/
● Specifi cations and equipment are subject to change without
any obligations on the part of manufacture.
● For more information, questions and comments regarding
products, please contact us below.
91 Chudoji Awata-cho Shimogyo-ku Kyoto 600-8815 Japan
TEL: +81-(0)75-325-1314
FAX: +81-(0)75-325-2936
Website : http://www.optex-fa.com