Optex CX-702 Installation Instructions

8
TROUBLE SHOOTING
PROBLEM P R O B A B L E C A U S E
Incorrect power supply voltage. (disconnection, or low voltage)
LED does not light. Improper detection area.
LED switch is OFF.
Improper polarity to detector.
LED lights even
Moving object within area. (curtain,wall hanging, etc.)
though no person
within area.
Temperature of object within area changing rapidly.
(heater, air conditioning, etc.)
LED lights but
Relay contact is stuck of damaged due to overloading.
signal is not sent.
Faulty Wiring.
LED continues to light. Poor connection of alarm memory.
Wrong control voltage from panel.
9
SPECIFICATIONS
Model CX-702 / CX-702V
D e e t t c o i n m e h t o d P a s s v i e Infrared
Wide Angle 85° wide Long Range
21 m × 21 m
Coverage 45 m × 2.4 m
(70 ft. × 70 ft.) (150 ft. × 8 ft.)
Detection zones 68 zone 22 zones
Mounting height 1.5 to 3.6 m (5 to 12 ft.)
1.6°C at 0.6 m / sec., 2.4 m mounting height
Sensitivity
(3°F at 2 ft. / sec., 8 ft. mounting height)
Detectable speed 0.3 to 1.5 m / sec. (1 to 5 ft. / sec.)
Power input 9.5 to 16 V DC
Alarm period Approx. 2.5 sec.
Alarm output N.C., 28 V DC 0.2 A (max.)
N.C., Opens when cover removed.
Tamper switch
28 V DC 0.1 A (max.)
Approx. 20 sec. 2 or 4
Pulse count
Warm up period Approx. 1 min.
LED indicator Alarm condition
RF interference No Alarm 30 V / m
Operating temperature -20°C to +50°C (-4°F to +122°F)
Environment humidity 95 % (max.)
Weight 200 g (7.0 oz)
* Specifications and design are subject to change without prior notice.
Manufacturer:
OPTEX CO., LTD.
5-8-12 Ogoto, Otsu, Shiga, 520-0101 JAPAN
Authorised representative in Europe:
OPTEX (EUROPE) LTD. / EMEA HEADQUARTERS
Marandaz House 1 Cordwallis Park, Clivemont Road,
Maidenhead, Berkshire, SL6 7BU U.K.
OPTEX CO., LTD. (JAPAN)
URL: http://www.optex.net
OPTEX INC. (U.S.) OPTEX SECURITY SAS (France)
URL: http://www.optexamerica.com URL: http://www.optex-security.com
OPTEX DO BRASIL LTDA. (Brazil) OPTEX SECURITY Sp.z o.o. (Poland)
URL: http://www.optex.net/br/es/sec URL: http://www.optex.com.pl
OPTEX (EUROPE) LTD. / EMEA HQ (U.K.) OPTEX PINNACLE INDIA, PVT., LTD. (India)
URL: http://www.optex-europe.com URL: http://www.optex.net/in/en/sec
OPTEX TECHNOLOGIES B.V. (The Netherlands)
URL: http://www.optex.eu
R E M E D Y
Correct supply voltage to 9.5 to 16 V DC. See Section 5.
See Section 2.
Turn on the switch.
Switch positive and negative at terminal.
Remove the souces from the detection area.
Remove object from the detection area.
Check load of output. The unit needs repair or replacement.
Wire correctly.
Reconnect wire.
Must be 0 to 1 V DC (grounded) See Section 7-3.
M o d l e C X 7 - 0 2
Current draw 8 mA (normal) / 11 mA (max.) at 12 V DC
M o d l e C X 7 - 0 2 V
Current draw 8 mA (normal) / 16 mA (max.) at 12 V DC
Alarm memory See Section 7-3.
D.L. terminal See Section 7-1.
Dimensions
100 (3.94)
Note>>
• This unit is designed to detect movement of an intruder and activate an
alarm control panel.
• Being only a part of a complete system, we cannot accept responsibility
for any damages or other consequences resulting from an intrusion.
OPTEX KOREA CO.,LTD. (Korea)
URL: http://www.optexkorea.com
OPTEX (DONGGUAN) CO.,LTD.
SHANGHAI OFFICE (China)
URL: http://www.optexchina.com
OPTEX (Thailand) CO., LTD. (Thailand)
URL: http://www.optex.net/th/th
Copyright (C) 2016 OPTEX CO.,LTD.
4
PASSIVE INFRARED DETECTOR PASSIVE INFRARED DETECTOR
CX-702 , CX-702V
CX-702 , CX-702V
FEATURES
● Dual Purpose Lens:Selectable "WIDE ANGLE" and "LONG RANGE" detection patterns
● Double Conductive Shielding of the pyroelectric element Extremely High Light and RFI
Immunity (Patent listed)
● Multifocus Optics Design (Patent listed)
● LED On / Off Switch
● Sealed Optics
● Easy Installation
● Alarm Memory (CX-702V Only)
● LED Remote Control Terminal (CX-702V Only)
1
INSTALLATION HINTS
1
Avoid direct sunlight.
5 6
Never repair or modify
product. It may cause
accident, fire hazard or
electric shock.
Do not install outdoors.
2
DETECTION AREA
W D I E A N G L E
TOP VIEW
0 10 20 30 40 50
30
20
mm (inch)
10
0
10
20
ft. 30
0 5 10 15
SIDE VIEW
0 10 20 30 40 50 60
A
5
ft. 8
0 5 10 15
0 10 20 30 40 50 60
B
5
8
ft. 12
0 5 1 0 1 5
0 10 20 30 40 50 60
5
8
C
ft. 12
0 5 10 15
INSTALLATION INSTRUCTIONS
*The CX-702 is UL Listed per UL639,Intrusion-Detection Units.
*The CX-702V has not been investigated by UL.
OPTION
CA-1W : Wall Mount Bracket : adjustable ±45° (Horizontally),
CA-2C : Ceiling Bracket : adjustable ±45° (Horizontally),
2 3
Avoid mounting detector where
movement of Fans or Air Avoid vapor or high
humidity that can
Conditioning Fans can be
detected. cause condensation.
7 WARNING
When damage has occured to
WARNING
the product, i.e. water logged,
abnormal things inside product,
overheating or smoking, strange
smells etc., immediately stop
using product and contact your
supplier. Otherwise, continued
use in such condition may cause
electric shock or fire hazard.
L O N G R A N G E
TOP VIEW
60 70 ft.
0 10 20 30 40 50 60 70
10
5
0
ft. 5
5
0 5 10 15 20
0
SIDE VIEW
0 10 20 30 40 50 60 70
5
A
5
ft. 8
0 5 10 15 20
10 m
20 21 m
0 10 20 30 40 50 60 70
70 ft.
5
B
8
ft. 12
1.5
2.4 m 0 5 10 15 20
20 21 m
0 0 10 20 30 40 50 60 70
70 ft.
C 5
1.5
8
2.4
ft. 12
3.6 m
0 5 10 15 20
2 0 2 1 m
70 ft.
**ATTENTION**
The specified detection area can be achieved by mounting the unit at a height of 2.4 m (8 ft.).
1.5
Mounting at a lower or higher height may reduce the area of coverage
2.4
3.6 m
1
20 21 m
No.59-0951-6 1602-22
UL No 59-0951-4 0904-30
0 to 20° (Vertically downwards)
0 to 20° (Vertically downwards)
4
Avoid Curtain,Screen,etc.
blocking detection area.
8
CAUTION
Mount securely.
A falling product
may cause injury.
This symbol indicates prohibition.
80 90 100 110 120 130 140 150 ft.
2
1
0
1
2 m
25 30 35 40 45 m
80 90 100 110 120 130 140 150 ft.
1.5
2.4 m
25 30 35 40 45 m
80 90 100 110 120 130 140 150 ft.
1.5
2.4
3.6 m
25 30 35 40 45 m
80 90 100 110 120 130 140 150 ft.
1.5
2.4
3.6 m
25 30 35 40 45 m