Optex CX-702RS Installation Instructions

PASSIVE INFRARED DETECTOR
CX-702RS , CX-702S
BATTERY OPERATED (CE)
FEATURES
Selectable "WIDE ANGLE" and "LONG RANGE"
●
detection patterns.
Double Conductive Shielding of the pyroelectric
●
element - Extremely High Light.
Multifocus Optics Design (Patent listed)
●
Sealed Optics
●
Easy Installation
●
1.INSTALLATION HINTS
1
Avoid direct sunlight.
6
WARNING
Never repair or modify
product. It may cause
accident, fire hazard or
electric shock.
2.DETECTION AREA
**ATTENTION**
The specified detection area can be achieved by mounting the unit at a height of 2.4m. Mounting at a lower or higher height may reduce the area of coverage.
Form C Relay
OPTION
CA-1W : Wall Mount Bracket ; Adjustable ±45°(Horizontally), 0-20°(Vertically downwards)
CA-2C : Ceiling Bracket ; Adjustable ±45°(Horizontally), 0-20°(Vertically downwards)
BA-70 : Backbox for wireless transmitter
2
Avoid mounting detector where
movement of Fans or Air
Conditioning Fans can be detected.
7
WARNING
When damage has occured to the
product, i.e. water logged, abnormal
things inside product, overheating or
smoking, strange smells etc.,
immediately stop using product and contact your supplier.
Otherwise, continued use in such condition may cause
electric shock or fire hazard.
CX-702RS Only
Low Current Draw : 5µA (Normal. In Standby)
●
Battery Oparated
●
Form C Alarm Output and Tamper Switch
●
3
Avoid vapor or high humidity
that can cause condensation.
CX-702S Only
Form C Alarm Output Relay
●
LED On/Off Switch
●
4
Avoid blocking detection area
with curtain, screen, etc.
8
CAUTION
Mount securely.
Fall of A product
may cause injury.
No.59-0974-3 0708-30
(CX-702RS Only)
5
Do not install in the outdoors.