Part Identification Chart - ICON PRO-FORM CARBON SMITHRACK User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see if it has been preassembled. Extra parts may be included.
6mm Spacer (75)
25mm Spacer (55)
M6 Washer (86)
M8 Washer (94)
M10 Split Washer (93)
M10 Washer (84)
17mm Spacer (66)
M10 Large Washer (76)
M6 Locknut (100)
M8 Locknut (78)
M10 Locknut (79)
M4 x 19mm Screw (82)
24mm Spacer (45)
50mm Spacer (44)
M8 x 15mm Screw (21)
M8 x 20mm Screw (34)
M8 x 20mm Shoulder Bolt (85)
M10 x 20mm Bolt (77)
M10 x 25mm Screw (98)
M10 x 30mm Screw (95)
7