ICON PRO-FORM CARBON SMITHRACK User Manual page 22

34. Attach the Low Cable (72) inside the Weight
Carriage (41) with an M10 x 68mm Bolt (90), two
M10 Washers (84), two 24mm Spacers (45), and
an M10 Locknut (79).
Attach the lower Carriage Bushing (42) inside
the Weight Carriage (41) with an M10 x 68mm
Bolt (90), two M10 Washers (84), a 50mm
Spacer (44), and an M10 Locknut (79).
35. Identify the High Cable (54).
Attach a Cable Stop (52), a Clip (53), and an M6
Locknut (100) to the High Cable (54) as described
in step 28. Make sure that at least two threads
of the High Cable show past the Locknut.
Next, route the High Cable (54) upward through
the left Upright (3) and over a 90mm Pulley (58).
Attach the 90mm Pulley inside the left Upright
with an M10 x 45mm Bolt (141) and an M10
Locknut (79).
34
90
84
35
32
Rod
54
79
52
58
53
100
22
72
45
45
41
84
79
44
42
141
3