PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part from the PART LIST near the end of this manual. Note: Some small parts may
have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.
M10 Washer (26)
M8 Washer (23)
M6 Washer (21)
M8 Locknut (22)
M6 x 16mm Screw (27)
5
M10 x 50mm Screw (19)
M8 x 68mm Bolt (24)
M8 x 68mm Carriage Bolt (20)
M6 x 73mm Screw (18)
M8 x 75mm Bolt (17)
M8 x 77mm Bolt (28)