ICON PRO-FORM CARBON SMITHRACK User Manual page 30

57. Attach the tether on the Seat Pin (123) to
the Seat Frame (122) with an M4 x 19mm
Screw (82).
58. Pull the Bench Knob (124) outward and insert
the Backrest Bracket (111) through the Bench
Frame (107). Engage the Bench Knob into the
Backrest Bracket.
59. Apply grease to an M10 x 180mm Bolt (40).
Attach the Backrest Frames (118) and the Seat
Frame (122) to the Bench Frame (107) with the
M10 x 180mm Bolt (40), two M10 Washers (84),
and an M10 Locknut (79). Do not overtighten
the Locknut; the Backrest Frames and the
Seat Frame (122) must pivot easily.
57
82
122
58
124
59
40
122
30
123
111
107
Grease
84
118
107
84
79