PART IDENTIFICATION CHART
Use the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in the hard-
ware kit, check to see if it has been preattached.
M6 Locknut
(33)
M6 Washer
(82)
M4 x 13mm
Screw (94)
M8 x 20mm
Screw (84)
M8 Locknut
(58)
M8 Washer
(59)
M10 Washer
10mm Spacer
(61)
M4 x 19mm
Self-tapping
Screw (69)
M8 x 20mm
Shoulder Bolt (65)
M10 Locknut
(56)
(57)
13mm Spacer
(52)
M4 x 25mm
Self-tapping
Screw (85)
M10 x 20mm
Screw (72)
6
M12 Nut (13)
Large Washer (17)
M6 x 16mm
Screw (62)
M10 x 25mm
Screw (77)