Part Identification Chart - ICON WEIDER XR 6.1 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot find a
part in the hardware kit, check to see if it has been preassembled. Extra hardware may be included.
M6 Washer (22)
M8 Washer (29)
M10 Washer (30)
M6 x 16mm
M6 x 40mm Screw (32)
M8 Locknut
M10 Locknut (31)
Screw (24)
(34)
M8 x 30mm
M8 x 45mm Bolt (28)
Carriage Bolt (10)
M8 x 65mm Bolt (36) M8 x 70mm Bolt (27)
M10 x 60mm Bolt (25)
M10 x 135mm Bolt (23)
6