60. Insert the Seat Pin (123) into the Seat Frame
(122) and the Bench Frame (107).
See step 54. Tighten the M8 Locknuts (78).
See step 55. Tighten the M6 x 40mm
Screws (39).
61. Insert the Long Pad Tube (115) through the Front
Leg (109). Slide a Foam Pad (128) onto each
end of the Long Pad Tube.
Attach the two Short Pad Tubes (129) to the
Leg Lever (110) in the same way.
Press a 19mm Round Cap (127) into the end of
each Pad Tube (115, 129).
62. Attach the Curl Pin (142) to the Leg Lever (110)
with an M4 x 19mm Screw (82).
60
123
122
61
128
128
110
129
128
129
62
110
82
142
31
107
128
115
127
109
128