Placing The Headset On Your Ear; Powering On/Off And Charging; Powering On; Powering Off - Sena SPH10H-FM-01 User Manual

Bluetooth stereo headset & intercom
Table of Contents

Advertisement

SPH10
Since SPH10 is mostly exposed on external environment
where noise prevails, microphone can be selected
according to the noise level. For the highly noisy
environment, boom-microphone is recommended allowing
microphone to stay near user's mouth. For the less-noisy
environment, mini microphone is recommended allowing
users to move freely.

3.2 Placing the Headset on Your Ear

The speaker with microphone should be placed on
the left ear. Then you can place earhooks over ears
as shown:
8

4. POWERING ON/OFF AND CHARGING

To power on and off the headset, you don't need
to press and hold any button for several seconds.
Just short press the Jog Dial and the Phone Button
simultaneously, and you will get quick on-and-off
convenience.

4.1 Powering On

Press the Jog Dial and the Phone Button at the same
time for about 1 second to power on. The blue LED
turns on and you will hear ascending beeps.

4.2 Powering Off

Just short press the Jog Dial and the Phone Button
simultaneously, you don't need to press and hold for
a few seconds. The red LED turns on for a while until
it turns off completely and you will hear descending
beeps.

4.3 Charging

The LED turns on red while charging, and turns to
blue when the headset is fully charged. It takes about
2.5 hours to be completely charged.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sph10

Table of Contents