Pairing With Other Sena Headset Models For Intercom Conversation - Sena NS10 User Manual

2. Press and hold the Center Button for 5 seconds, then you will hear a mid-tone single beep and a voice prompt,
"Intercom pairing"
3. Simply tap the Center Button of any one of the two headsets A or B (It doesn't matter that you choose A or B.) and
wait until the LEDs of both headsets turn to blue and intercom connection is automatically established. The two NS10
headsets A and B are paired with each other for intercom conversation. If the pairing process is not completed within
one minute, the NS10 will return to stand-by mode.
4. You can make other pairings between the headset A and C, and between the headset A and D by following the same
procedure as above.
5. The intercom pairing queue is 'Last-Come, First-Served'. If a headset has multiple paired headsets for intercom
conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second
intercom friend, and third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is
the second intercom friend of headset A, and headset B is the third intercom friend of headset A.

6.2 Pairing with Other Sena Headset Models for Intercom Conversation

The NS10 can be paired with all other Sena headset models such as the SMH10, SPH10 and the SMH5 for intercom
conversation. Please follow the same procedure as above to pair with these headset models.
Pairing A & B
Pairing A & C
11
Pairing A & D
| NS10