Table of Contents
Advertisement
15. FOUR-WAY CONFERENCE
INTERCOM
15.1 Start Four-way Intercom
You can have four-way conference intercom with three
other SPH10 users by adding one more intercom
participant to the three-way intercom. While you are
having three-way intercom as above in section 14.1, a
new participant (D), who is an intercom friend of your
intercom friend (C), may join the conference intercom
by making an intercom call to your intercom friend
(C). Please note that in this case, the new participant
(D) is an intercom friend of (C), not of you (A).
You
(A)
First Friend
Second Friend
(B)
New Participant
(D)
= Intercom Friend of (C)
(C)
15.2 End Four-way Intercom
As same in the case of three-way intercom, you can
completely get out of the four-way conference intercom
or just disconnect a single intercom connection.
1. Press the Jog Dial for 1 second until you hear a
beep to terminate four-way conference intercom. It
terminates the intercom connections between you
(A), and your intercom friends (B), (C) and (D).
2. Tap or double tap the Jog Dial to disconnect
the intercom connection with one of the two
intercom friends accordingly. However, when
you disconnect the second friend (C) by double
tapping the Jog Dial, you will be disconnected with
the third participant (D) as well. This is because
the third participant (D) is connected with you via
the second friend (C).
Jog Dial Operation
Press for 1"
Single tap
Double tap
End Four-way Intercom
SPH10
Result
Disconnect (B), (C) & (D)
Disconnect (B)
Disconnect (C) & (D)
31
Advertisement
Table of Contents
