Troubleshooting - CyberPower 1U Series User Manual

OPERATION
Firmware Upgrade
Option 3: Use a USB Flash Drive
Use the following steps to upgrade the frmware.
1. Download the latest frmware from
www.cyberpower.com.
2. Extract the fle to the root directory of a USB fash drive
with FAT32 format. Please note that the two fles below
should be available in order to complete the frmware
upgrade process:
• cpsmpdumadata_xxx.bin
• cpsmpdumafw_xxx.bin
3. Plug the USB drive into the PDU USB port and
press Enter button on the PDU LCD screen to enter
Main Menu. The USB option will be displayed.
Main Menu
4. Select USB and press Enter button to enter Firmware
Upgrade menu.

TROUBLESHOOTING

Problem
PDU outlets do not provide power
to connected equipment
Amperage displayed on LCD screen
exceeds the units capability
Circuit breakers have tripped
Alert
Meter
Control
Sensor
Setting
About
USB
1. Breaker tripped
2. Power cord is not properly
plugged in
Overload
1. Sustained overload
2. Excessive ambient or internal
temperatures
3. Faulty breaker
5. Select Main and Yes to start the upgrade process.
USB
Firmware
Upgrade
Main
Return
6. The PDU will reboot after the process is completed.
Note: You can check to see if the frmware upgrade is
successful by checking the "Firmware version" on the
[System->About] screen via web UI.
Possible Cause
30
Main USB
Firmware Firmware
Upgrade Upgrade
Confrm? Processing
Yes
No
Solution
Reset Breaker, check the plug to insure
its connected correctly. If the problem
remains, contact technical support.
The load indicator shows red when
overload. Reduce the load on the
PDU until the overload is gone. If the
problem remains, contact technical
support.
Reset Breaker.
If the problem remains, contact
technical support.
USB
Firmware
Upgrade
Success