Esc % N; Esc & Y C1 C2 [X1 D1 - Epson TM-T90 Specification

Confidential

ESC % n

[Name] Select/cancel user-defined character set
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
[Default] n = 0
[Description] • Selects or cancels the user-defined character set.
•
When the LSB of n is 0, the user-defined character set is canceled.
•
When the LSB of n is 1, the user-defined character set is selected.
ESC & y c1 c2 [x1 d1...d(y × × × × 1)]...[xk d1...d(y × × × × xk)]
[Name] Define user-defined characters
[Format] ASCII
Hex
Decimal
[Range] For ANK/Multilingual model:
y = 3
32 ≤ c1 ≤ c2 ≤ 126
0 ≤ x ≤ 12 (when font A (12 × 24) is selected)
0 ≤ x ≤ 9 (when font B (9 × 17) is selected)
0 ≤ d ≤ 255
k = c2 – c1 + 1
For Japanese model:
y = 3 (when font A (12 × 24) / font B (10 × 24) selected)
y = 2 (when font C (8 × 16) selected)
32 ≤ c1 ≤ c2 ≤ 126
0 ≤ x ≤ 12 (when font A (12 × 24) is selected)
0 ≤ x ≤ 10 (when font B (10 × 24) is selected)
0 ≤ x ≤ 8 (when font C (8 × 16) is selected)
0 ≤ d ≤ 255
k = c2 – c1 + 1
[Description] • Assigns the user-defined character pattern for the specified character codes.
•
y specifies the number of bytes in the vertical direction.
•
c1 specifies the beginning character code for the definition, and c2 specifies the final code.
•
x specifies the number of dots in the horizontal direction.
•
d specifies the definition data.
• When memory switch 8-7 is On, the user-defined character and the downloaded bit image
[Notes]
cannot be defined simultaneously. The downloaded bit image data is cleared with this
command.
EPSON
ESC % n
1B 25 n
27 37 n
ESC & y c1
1B 26 y c1
27 38 y c1
TITLE
TM-T90
Specification
(STANDARD)
[x1 d1...d(y × 1)]...[xk d1...d(y × xk)]
c2
[x1 d1...d(y × 1)]...[xk d1...d(y × xk)]
c2
[x1 d1...d(y × 1)]...[xk d1...d(y × xk)]
c2
SHEET
REVISION
F
NO.
NEXT SHEET
84 83