Table of Contents
Advertisement
ESC K n
[Name]
Print and reverse feed
[Format]
ASCII
Hex
Decimal
0 £ n £ 255
[Range]
[Description] Prints the data in the print buffer and feeds the paper by n /60 inches ( n ´ approximately
0.423 mm) in the reverse direction.
ù This command is available only in standard mode.
[Notes]
ù The setting values do not remain.
ù After printing is completed, this command sets the print position to the beginning of the
line.
ESC L
[Name]
Select page mode
[Format]
ASCII
Hex
Decimal
[Description] Switches from standard mode to page mode.
ù Page mode develops the data received in the specified printable area and collectively
prints the data when the FF command is given. Therefore, print commands (such as
LF) are developed in printer memory but are not actually executed.
ù When an FF command is given, the data in the specified printable area is printed and
the printer then returns to standard mode.
ù This command is enabled only when input at the beginning of a line.
[Notes]
ù In page mode, the printer processes data using only normal dot. In another word, the
printer does not use half dot in page mode. Therefore, be careful when settings using
half dot in standard mode.
ù Only character fonts with normal dot configuration are available.
EPSON
ESC
K
n
1B
4B
n
27
75
n
ESC
L
1B
4C
27
76
TITLE
TM-U295/U295P
Specification
(STANDARD)
SHEET
NO.
REVISION
NEXT
F
51
SHEET
50
Advertisement
Table of Contents
