Epson TM-U295 Manual page 60

ù The status data transmitted is shown in the following table:
n = 1: Printer status
Bit Off/On
0
1
2
3
4
5
6
7
n = 2: Off-line status
Bit Off/On
0
1
2
3
4
5
6
7
Bit 5: The printer will stop printing and "32" (printing currently stopped) occurs if a
EPSON
Hex Decimal
Off 00 0
On 02 2
Off 00 0
On 04 4
Off 00 0
On 08 8
On 10 16
Off -- --
On -- --
Off -- --
On -- --
Off 00 0
Hex Decimal
Off 00 0
On 02 2
Off -- --
On -- --
Off 00 0
On 08 8
On 10 16
Off 00 0
On 20 32
Off 00 0
On 40 64
Off 00 0
paper-end is detected by TOF or BOF sensor when paper-end printing stop is
selected by ESC c 4.
TITLE
TM-U295/U295P
Specification
(STANDARD)
Function
Not used. Fixed to Off.
Not used. Fixed to On.
Drawer kick-out signal is LOW (connector pin 3).
Drawer kick-out signal is HIGH (connector pin 3).
On-line.
Off-line.
Not used. Fixed to On.
Undefined.
Undefined.
Undefined.
Undefined.
Not used. Fixed to Off.
Function
Not used. Fixed to Off.
Not used. Fixed to On.
Undefined.
Undefined.
Paper is not being fed by the paper feed button.
Paper is being fed by the paper feed button.
Not used. Fixed to On.
No paper-end stop.
Printing stops due to paper-end.
No error.
Error occurs.
Not used. Fixed to Off.
SHEET
REVISION
F
NO.
NEXT SHEET
38 37