Esc C 4 N - Epson TM-U295 Manual

ESC c 4 n

[Name] Select paper sensor(s) to stop printing
[Format] ASCII
Hex
Decimal
0 £ n £ 255
[Range]
[Description] Selects the paper sensor(s) used to stop printing when a paper-end is detected, using n
as follows:
Bit Off/On
0
1
2
3
4
5
6
7
ù It is possible to select multiple sensors to stop printing. Then, if any of the selected
[Notes]
sensors detects a paper-end, the printer stops printing.
ù When a paper-end is detected, printing stops after printing and feeding the current line.
In this time, if the panel buttons are disabled, the printer release the paper and waits the
next paper automatically.
[Default] n = 0
[Reference] ESC c 5
EPSON
ESC c 4
1B 63 34
27 99 52
Hex Decimal
Off -- --
On -- --
Off -- --
On -- --
Off -- --
On -- --
Off -- --
On -- --
Off 00 0
On 10 16
Off 00 0
On 20 32
Off -- --
On -- --
Off -- --
On -- --
TITLE
TM-U295/U295P
Specification
(STANDARD)
n
n
n
Function
Undefined.
Undefined.
Undefined.
Undefined.
Undefined.
Undefined.
Undefined.
Undefined.
TOF sensor disabled.
TOF sensor enabled.
BOF sensor disabled.
BOF sensor enabled.
Undefined.
Undefined.
Undefined.
Undefined.
SHEET
REVISION
F
NO.
NEXT SHEET
56 55
57 56