Epson TM-U295 Manual page 12

General Description
Application
These specifications apply to TM-U295(Standard Specification)(RS-232 Serial Interface
Specification) or to TM-U295P (IEEE 1284 Bidirectional Parallel Interface Specification).
Features
The TM-U295 is terminal slip printer which uses a 7-pin shuttle dot printing method, and
provides the different modes, standard and page ( * ).
The printer has the following features:
ù Programmable page length.
ù Programmable print starting position.
ù Multiple character sizes (standard, double-width, double-height, and quadruple).
ù Character directions: 4
ù International character set selection.
ù Forward and backward paper feeding.
ù Command protocol based on the ESC/POS
ù Programmable paper feed amount.
ù Paper eject function.
ù Top Of Form (TOF) and Bottom Of Form (BOF) sensors.
ù Data reception during printing (improved throughput and less waiting time for the host
computer).
ù 512 byte printer buffer memory.
ù Compact, space efficient design.
ù Drawer kick-out function.
ù Automatic Status Back (ASB) function to automatically send printer status changes.
ù Either RS-232 serial interface or 1284 bidirectional parallel interface should be selectable
when the product is shipped from the factory.
* In page mode, the print data is buffered within a specified printing area in the memory.
After all the data has been buffered in the specified printing area, it is all printed at one
time.
TITLE
TM-U295/U295P
Specification
(STANDARD)
TM
standard.
SHEET
REVISION
F
NO.
SHEET
NEXT
I
II