Epson TM-U295 Manual page 74

ù The following commands have two type of setting values, one is for standard mode, the
other is for page mode.
ù The following commands are ignored in page mode.
The following commands are settable but do not have any effect in page mode.
ù ESC { (Upside-down printing mode on/off)
ù ESC ! (7 ´ 7 font mode on/off and underline mode on/off)
ù The commands are effective only in standard mode.
ù Use of ESC @ causes the printer to return to standard mode without carrying out
printing.
[Default] Standard mode is selected.
[Reference] FF
Section 3.9.2, Page Mode Limitations
Appendix D, Transmission Status Identification
EPSON
ESC SP: Set right-side character spacing
ESC 2: Set the inital line spacing
ESC 3: Set line spacing
ESC K: Print and reverse feed
ESC e: Print and reverse feed n lines
ESC * * * * :
Set double-density bit image.
ESC q: Paper release
TITLE
TM-U295/U295P
Specification
(STANDARD)
SHEET NO.
REVISION
NEXT
F
52
SHEET
51