Epson TM-U295 Manual page 61

n = 3: Error status
Bit Off/On
0
1
2
3
4
5
6
7
n = 5: Slip paper status
Bit Off/On
0
1
2
3
4
5
6
7
Bit 3: Switches to "1" (waiting for paper insertion) at the end of current printing
EPSON
Hex Decimal
Off 00 0
On 02 2
Off -- --
On -- --
Off -- --
On -- --
On 10 16
Off 00 0
On 20 32
Off -- --
On -- --
Off 00 0
Hex Decimal
Off 00 0
On 02 2
Off 00 0
Off 00 0
On 08 8
On 10 16
Off 00 0
On 20 32
Off 00 0
On 40 64
Off 00 0
operation, if print stop is selected when paper-end is detected by ESC c 4 as well
as subsequent print data being present.
Switches to "0" (not waiting for paper insertion) just before actual slip selection
takes place after slip paper is detected.
TITLE
TM-U295/U295P
Specification
(STANDARD)
Function
Not used. Fixed to Off.
Not used. Fixed to On.
Undefined.
Undefined.
Undefined.
Undefined.
Not used. Fixed to On.
No unrecoverable error.
Unrecoverable error occurred.
Undefined.
Undefined.
Not used. Fixed to Off.
Function
Not used. Fixed to Off.
Not used. Fixed to On.
Slip paper selected.
Does not wait for slip paper insertion.
Waits for slip paper insertion.
Not used. Fixed to On.
Slip is detected by the BOF sensor.
Slip is not detected by the BOF sensor.
Slip is detected by the TOF sensor.
Slip is not detected by the TOF sensor.
Not used. Fixed to Off.
SHEET
REVISION
F
NO.
NEXT SHEET
39 38