Table of Contents
Advertisement
PSoC™ 6 Wi-Fi Bluetooth® pioneer kit guide
CY8CKIT-062-WIFI-BT
Introduction
Inspect the contents of the kit; if you find any part missing, contact
1.2
Getting started
This guide will help you to get acquainted with the PSoC™ 6 Wi-Fi Bluetooth® Pioneer Kit:
•
The
"Kit operation"
hardware features and functionalities.
•
The
"Hardware"
on page 35 provides a detailed hardware description, methods to use the onboard
components, kit schematics, bill of materials (BOM), and FAQs.
1.3
Board details
1.3.1
CY8CKIT-062-WIFI-BT board details
Figure 2
shows the Pioneer Board, which has the following features:
•
PSoC™ 6 MCU
•
Expansion headers that are compatible with Arduino Uno 3.3-V shields
•
Type 1DX ultra-small 2.4-GHz WLAN and Bluetooth® functionality module
•
512-Mbit external quad-SPI NOR flash that provides a fast, expandable memory for data and code
•
EZ-PD™ CCG3 USB Type-C Power Delivery (PD) system with rechargeable lithium-ion polymer (Li-Po) battery
2)
support
. KitProg3 onboard programmer/debugger, USB-to-UART/I2C/SPI bridge functionality
•
CAPSENSE™ touch sensing slider (five elements) and two buttons, all of which are capable of both self-
capacitance (CSD) and mutual-capacitance (CSX) operation, and a CSD proximity sensor that allows you to
evaluate Infineon's fourth-generation CAPSENSE™ technology
•
1.8-V to 3.3-V operation of PSoC™ 6 MCU is supported
•
Two user LEDs, an RGB LED, a user button, and a reset button for PSoC™ 6 MCU
•
Two button and three LEDs for KitProg3
Note:
1. Starting with Rev. *F of the kit, the super capacitor is removed. Therefore, you must keep SW7 at VDDD/KITPROG3
position. If not, the kit will not be powered and the TFT display flickers.
2. In the Rev *F version of the kit, the silkscreen on the board shows KitProg2. However, the KitProg3 is loaded on
the kit.
1) 5-V shields are not supported.
2) Battery and power-delivery capable USB Type-C to Type-C cable are not included in the kit package and should be purchased
separately.
User guide
on page 20 describes the CY8CKIT-062-WIFI-BT baseboard and CY8CKIT-028-TFT shield
Infineon
support.
1)
and Digilent Pmod modules
7
002-22677 Rev. *J
2023-12-18
Advertisement
Table of Contents
