Table of Contents
Advertisement
PSoC™ 6 Wi-Fi Bluetooth® Pioneer Kit guide
CY8CKIT-062-WIFI-BT
Hardware
3
Hardware
3.1
Schematics
See the schematic files available on the
3.2
Hardware functional description
This section explains the individual hardware blocks of the PSoC™ 6 Wi-Fi Bluetooth® Pioneer Board.
3.2.1
PSoC™ 6 MCU (U1)
PSoC™ 6 MCU is an ultra-low-power PSoC™ family device specifically designed for wearables and IoT products. It
is a programmable embedded system-on-chip, integrating a 150-MHz CM4 as the primary application processor,
a 100-MHz CM0+ that supports low-power operations, up to 1 MB Flash and 288 KB SRAM, CAPSENSE™ touch-
sensing, and custom analog and digital peripheral functions. The programmable analog and digital peripheral
functions allow higher flexibility, in-field tuning of the design, and faster time-to-market.
For more information, see the
Simultaneous GPIO switching with unrestricted drive strengths and frequency can affect CAPSENSE™ and ADC
performance. For details, see the "Errata" section of the corresponding
3.2.2
PSoC™ 5LP (U2)
An on-board PSoC™ 5LP MCU (CY8C5868LTI-LP039) is used as KitProg3 to program and debug the PSoC™ 6 MCU.
The PSoC™ 5LP MCU connects to the USB port of a PC through a USB connector and to the SWD and other
communication interfaces of PSoC™ 6 MCU. The PSoC™ 5LP MCU is a system-level solution providing MCU,
memory, analog, and digital peripheral functions in a single chip. The CY8C58LPxx family offers a modern method
of signal acquisition, signal processing, and control with high accuracy, high bandwidth, and high flexibility.
Analog capability spans the range from thermocouples (near DC voltages) to ultrasonic signals.
For more information, visit the
User guide
kit
webpage.
PSoC™ 6 MCU webpage
PSoC™ 5LP
webpage. Also, see the
35
and the datasheet.
device datasheet.
CY8C58LPxx family
datasheet.
002-22677 Rev. *J
2023-12-18
Advertisement
Table of Contents
