Table of Contents
Advertisement
User Guide for XENSIV™ KIT PAS CO2
Introduction
lines. The baseboard can interact with the outside world using Wi-Fi, Bluetooth, USB, or a combination of them
depending on the firmware/software (FW/SW) that is installed on the rapid IoT baseboard. The kit can be
powered from an external power supply or from a LiPo battery.
Figure 6
CSK system block diagram
2.4
Getting started
This guide will help you to get acquainted with the XENSIV™ KIT CSK PASCO2:
•
Chapter Quick IoT Experience demonstrates how to read sensors and connect to the Rapid IoT connect
cloud platform in less the 10 minutes
•
Chapter Build your own application explains how to use ModusToolbox™ to build your own application
to connect to your own cloud solution. ModusToolbox™ provides numerous code examples to make
this process easier.
Note: CYSBSYSKIT-DEV-01 requires ModusToolbox™ 2.2 or higher to design and debug applications.
Download and install ModusToolbox™ from www.cypress.com/modustoolbox. See the ModusToolbox™
Installation Guide
Users can experience the XENSIV™ KIT CSK PASCO2 in two ways:
a) Quick IoT experience for straightforward evaluation
b) Code examples in ModusToolbox™ for IoT solutions development
and
ModusToolbox™ IDE Quick Start Guide
for additional information.
10 of 54
2022-25-04
Advertisement
Table of Contents
