Manual Test Mode Commands - Motorola A920 Service Manual

Troubleshooting

Manual Test Mode Commands

Table 8. Level 2, 3G Handset Test Commands
Opcode
Opcode
(Decimal
Mnemonic
)
0 AUD_TN_L
ST
3 AUD_CTRL
38
Click the keyboard icon at the bottom of the screen to display a keyboard. Use the
keyboard to enter the Opcode and field values. You can also use the stylus to enter
opcodes and field values (see Figure 20).
Figure 22. Test Command Opcode Entries with the Keyboard or Stylus
Handset Test commands are listed in Table 8.
Note: The handset can be suspended only by executing the SUSPEND test command.
You can exit the feature and return to idle if the handset has not yet been suspended.
Otherwise, exiting the feature causes a restart.
Key Entry Descriptio
Format n
0 *<Action> Generate/
* <Tone disable
Identifier>O predefined
K tone
3 *<Device/ Control
Process> * various
<Action>OK audio
functions;
enable/
disable
vibrator
Field
Field 1 0 = start a tone
1 = stop a tone
Field 2 0-9 = DTMF tones
Field 1 0 = Vibrator
2 = Echo canceling
3 = Noise suppressor
Field 2 0 = Disable
1 = Enable
October 27, 2003
A920, A925
Field Value
6881024B40-A